FUSION 3.1

[Stanek@tnet.cz (Stanek Daniel)]

Németh Tamás wrote:
> 
> >  Jo to je fakt a mimochodem uz je FUSION 3.1

> Cece co je tam naveho? PPC???

Jeste mi sem ho nedostal :-( ale tady naky info.

Changes to V3.1 (02/14/98)
--------------------------------------------------------------------------
* Fixed MonitorID gadget setting.  The value was set and saved in the
  config file correctly, but not displayed after loading a new config
  or starting the emulation setup.

* Added Store Buffer option to the CPU cache control window.  This is
  an 060 only cache option.

* Fixed a major problem with the emulated SCSI support.  If you did not
  have an EMPLANT board installed (and selected for use by FUSION), you
  could not boot from any non-EMPLANT SCSI device.  If you had an
  EMPLANT board installed (and selected as the hardware type), then you
  could boot from ANY SCSI device even if you did not have a drive
  connected to EMPLANT's SCSI port.

* Fixed a problem with the Direct video drivers when an invalid monitor
  ID was given.

* Added support for the floppy eject/insert icons for thousands and
  millions display modes.  Also corrected placement problems when the
  screen's mod was not the same as its width.

* Added new gadget 'Start Delay' to ADVANCED setup and renamed the
gadget
  'Iconify on startup' to 'Auto-Iconify'.  The Start Delay checkbox
  defaults to ON (checked).  Having this gadget checked will insert a
  3 second delay before the startup sound.  This gives you extra time to
  press (and HOLD) either SHIFT key to disable extensions.  Having this
  gadget unchecked boots the MAC as normal, with no additional delay.

* Fixed AmiDirectXL startup in 640x480 mode.  The autoscroll flag was
not
  being set correctly, so ECS machines would lose the bottom part of the
  display until you re-opened the mode in the Monitors control panel

* Changed serial port code to open/close an AmigaDOS device only when
the
  MAC actually opens/closes its serial port driver.  This leaves the
serial
  and parallel ports available for use by the Amiga when the MAC is not
  trying to access them.


**************************************************************************

Changes to V3.0 (02/04/98)
--------------------------------------------------------------------------
* Corrected ICP error message window size/position when shutting down
  (and a mounted MAC volume has an Amiga lock).

* New 'mscd.device' driver that should recognize all CD-ROM discs.

* Corrected sense_length problem that caused gvpscsi.device and
  omniscsi.device to not respond to direct SCSI calls.

* Fixed serial/parallel device usage.  Units other than 0 were being
  ignored.

* Added anti-mouse trail code to Retina video driver.  This was the only
  driver that did not have this code.

* Added SuperScalar, Branch Cache, and Store/Load Bypass controls to the
  CPU Cache Control window (68060 only).  Please note that we are no
longer
  automatically shutting off the SuperScalar with any 060 system when
OS8.x
  is detected.  By default, the SuperScalar, Branch Cache, and
Store/Load
  Bypass are shut off.  We recommend that you leave these alone!  There
are
  MANY applications that will NOT work with any of these turned on, and
  loss of data may occur if you turn these on.  PLEASE BE CAREFUL!

* Fixed problems with OS8.1 working with the 68060.

* Added File Type and Creator database.  You can now add/edit, remove,
  sort,  load, and save definitions for any file type and creator.  This
  makes file transfers much easier since the correct file type and
  creator will be attached to the file as it is transferred (allowing
  the proper icon to appear on the Mac's desktop).

* Added ability to delete the PRAMxxx.config file from inside the
  emulation setup (Configuration menu) before starting the emulation.

* File transfers now use direct reads and writes when not in VIRTUAL
mode.
  This dramatically increases the performance of file transfers.

* Corrected possible problems with file transfer lock ups when using
  Intelligent or MacBinary transfer modes.

* Added new features to DEVICES and VIDEO DRIVER selections:

  You can now SHIFT-Click (hold the SHIFT key and click the mouse
button)
  an entry in the LEFT window to view detailed information about the
item.

  You can now SHIFT-Click an entry in the RIGHT window to remove it from
  the list (in the DEVICES setup, the device name will be moved back to
  the LEFT window).

* Removed the CLEAR SELECTED option from the DEVICES and VIDEO DRIVER
  setups.  To remove entries, see above.

* In the DEVICES setup, clicking on an entry in the RIGHT window now
  displays the device name, size, and the current hard drive format
  (Amiga, Macintosh, PC, etc.)  This should help prevent 'accidents'.
  The device options are also immediately available instead of having to
  go one menu level deeper to access them, as in previous versions.

* Added error message specifically for the built-in CD-ROM support.  If
  there was a problem opening the controlling device driver, a standard
  "can't open AmigaDOS device" message was displayed, which is also
  displayed if there was a problem setting up any hard drive partition.

* Added ability to select multiple monitor IDs so that two video boards
  using the same setup (Cybergraphics or Picasso96) can use both video
  boards at the same time.

* Corrected a bug in the all video drivers that have video board blitter
  support.  When a screen switch occured, the blitter was still active
  on the front most screen, which may not be the MAC's emulation screen
  if you have multiple screens on the video board.

* New 'mshf.device' driver.  This is the device driver that controls the
  hardfile access.  This driver should NEVER be selected anywhere in the
  emulation configuration (it is used internally by FUSION).  This new
  version no longer calculates the length of the file using the SEEK()
  method, so starting up the emulation is substantially quicker when
  using a hardfile as one of your devices.

* Corrected problems with mshf.device when using hardfiles that are
  larger than 2gig in size.  Please don't use hardfiles this big!

* Corrected problems with formatting MAC partitions that are in or
  cross into the >2gig boundry.